- 美国Masterflex
- OMEGA热电偶
- OMEGA热电偶线
- OMEGA热电偶补偿导线
- OMEGA插头插座面板
- OMEGA热电阻
- OMEGA热敏电阻
- OMEGA变送器
- OMEGA高温胶
- OMEGA红外温度测量仪器
- OMEGA温湿度标签
- OMEGA温度计/湿度计
- OMEGA温湿度传感器
- OMEGA泵和混合器
- OMEGA校准器
- OMEGA压力计
- OMEGA压力表
- OMEGA压力开关
- OMEGA压力传感器
- OMEGA称重传感器
- OMEGA应变片
- OMEGA液位开关
- OMEGA液位传感器
- OMEGA阀门
- OMEGA流量计
- OMEGA扭矩传感器
- OMEGA位移传感器
- OMEGA加速度计
- OMEGA风洞
- OEMGA风速计
- OMEGA电工电工仪表
- OMEGA pH和传导
- OMEGA加热器
- OMEGA信号调节器
- OMEGA测试与测量
- OMEGA I/P转换器
- OMEGA数据采集
- OMEGA自动化
- OMEGA过程及控制
- OMEGA压力应力重力传感器
- 圣戈班软管
- 美国Antylia
- 美国Cole-Parmer
- 德国HelixMark
- Cole-Parmer流量计
- 美国Masterflex泵管
- 道康宁/Dow Corning硅胶管
- Kinesis
- 美国pyrex
- 美国zefon
- Nasco Whirl-Pak无菌采样袋
- 英国STUART
- 美国JACO
- Ismatec泵|软管
- 日本Horiba
- 英国Burkard布卡德
英国Burkard MEI0049气旋表层取样器可以应用于:
1)医药学方面,用于收集房间内的过敏源尘、花粉;
2)农业,从植物体上收集病原体孢子或者从动物身上或动物饲舍中收集粉尘;
3)工业上可以用于进行例行的表层样品收集,以保证所需的卫生条件及检测有害污染物;
4)在法医学或环境污染方面,必要的话,它可以为特定的显微污染物采集基质。
高度 230 mm (9 inches)
宽度 110 x 45 mm (4.3 x 1.8 inches)
净重 520 g (1.2 lb)
收集容器: 25 x 50 mm (1 x 2 inches)
旋风口: 9 x 3 or 9 x l mm (0.35 x 0.1 or 0.35 x 0.04 inches)
Product Description
The high efficiency of small cyclones in retaining particles from an air stream has been adapted to provide a convenient means of collecting dry surface deposits from a wide variety of materials. For applications in medicine the house dust allergen, pollens: or in agriculture, spores of plant pathogens, dusts from animals or in animal houses; in industry for routine sampling of surfaces to ensure hygiene and help detect deleterious contaminants for forensic and environmental pollution where it is necessary to sample substrates for particular microscopic contaminants.
Effectiveness of the orifice in sampling surface deposits depends largely on a very fast intake velocity to provide strong ‘rip-off’ . For this reason the standard orifice has been decreased in cross section to l x 9 mm. Effective operation of this cyclone requires a powerful pump capable of maintaining at least 18 cm (7 inches) mercury pressure difference while displacing 16.5 l/min of air through the cyclone via a critical orifice installed in the handle.
For dry powders where almost all the deposit is collected in the catchpot, samples from equal areas should be quantitatively comparable (even gravimetrically from dense deposits). The retention efficiency of the cyclone means that very little escapes but it is possible to install an ultimate filter stage. The cyclone has been designed with a stub-intake in order to fit alternative sampling orifices as required. Burkard will be pleased to advise or construct other orifices that may be found best for particular purposes. Samples are collected in small tubes which are readily detached capped and replaced by releasing a spring plunger in the base of the handle. This action also release the cyclone unit which is easily taken to pieces for cleaning or replacement.
Additional information
Overall height |
230 mm |
---|---|
Overall width |
110 x 45 mm |
Nett weight |
520 g |
Collecting vessel |
25 x 50 mm |
Cyclone orifice |
9 x 3 or 9 x l mm |
Vacuum hose |
6 mm bore |