产品名称：PDE0009型号英国Burkard 900X精密微量施药器

制造商：BURKARD，英国 布卡德PDE0009

仪器用途

该仪器由电子控制的低电压微量施药器。使用英国Burkard 1毫升全玻璃注射器时，点滴量可在1至100微升内调整。而同类其它注射器只可提供10倍量。全金属结构，适合于长期高精度分发。可用指轮快捷地选择分发量，每次增加0.1 µl，一次至大的分发量可以达到999µl。广泛应用于实验室研究及化学液体定量滴定工作上。

产品特点

-此器械组合与电脑兼容，

-可通过脚动、手动或遥控开关来操作

-注射器设计为双向式迅速移动

-**装置可以避免仪器在使用中损坏

仪器组成

-该仪器由控制单元和注射单元组成

-10cc全玻璃注射器

-脚踏开关

-圆环形或指动开关

-远程控制插座

技术指标

1ml注射器至大施药量	500µl
控制单元尺寸（W×D×H）	115×332×140mm
注射单元尺寸（W×D×H）	106×300×106mm
总重	1.47kg
电压	240V 50Hz或110V 60Hz

Additional information

Product Description

The Burkard 900X offers very high precision dispensing with a mean accuracy of 0.4% using gas-tight syringes. The error is reduced with larger volumes. Volumes of 0.1 microlitre increments can easily be set on the thumbwheel switch and a single delivery can be increased up to 999 microlitres. Two syringes cover the entire range of aliquot volumes – 1 ml and 10 ml glass syringes, with luer fitting.

The 900X is designed to overcome the inherent problems of dispensers utilising electronic linear motors. A low voltage fully electronic unit, computer compatible, which can be operated from foot, hand or remote switching, making it completely safe with hazardous materials. Rapid traverse is available in both directions and safety devices are fitted to avoid damage to the mechanism during use.

Construction and Equipment Details

Robustly built for long-term high precision dispensing. The syringe driver utilises an independent precision ball carriage and motor unit avoiding the use of a linear stepping device. With this arrangement correct alignment is maintained and ensured accuracy over long periods.

The following equipment is supplied as standard:

• Foot switch with simple plug-in connector
• Ring or finger switch with plug-in connector
• Socket on syringe unit for remote control

Extra Equipment

10ml all-glass syringe complete with stainless steel mounting sleeve.